Cutting Crown Molding Angles Requires the Right Tools and Skills
By Mark J. Donovan
When it comes to installing crown molding much of the success depends on cutting crown molding angles correctly.
Cutting crown molding angles correctly requires a quality miter saw and a coping saw. A quality miter saw may cost you a couple of hundred dollars, however a coping saw may only set you back ten to twenty dollars.
For most crown molding installation projects, cutting crown molding angles involves cutting 45o angles using a miter saw. By cutting two pieces of crown molding at 45o angles, a 90o angled inside or outside crown molding corner can be formed.
Since most walls are not perfectly square, coped angled crown molding cuts are also required. Coped crown molding angles are formed by the intersection of two ends of two pieces of crown molding. One of the crown molding pieces is butted firmly up against the inside corner using a square cut. The other crown molding piece has one of its ends cut with a coped crown molding angle so that this angled cut sits over the square-cut end of the adjacent crown molding piece. The visual effect is a perfect 90o angle inside corner.
When learning how to cut crown molding angles it is wise to practice on a few scrap pieces of crown molding first. Without this practice, you might find yourself spending an inordinate amount of money on wasted crown molding stock.
For more information on Installing Crown Molding see HomeAdditionPlus.com’s “Installing Crown Molding Ebook”.
Cutting Crown Molding Angles You On Here » Cutting Crown Molding Angles
