Sanding Deck Edges with a Palm Sander is Slow and Tedious
By Mark J. Donovan
Due to the fact that it rained shortly after I put a coat of deck sealer on my deck back two years ago, I have found myself sanding my deck to restore its look and to prepare it for a deck stain. If I can offer one word of advice, it is to make sure there is no rain in the forecast for at least 24 hours before applying a deck sealer. My deck remained tacky for months and the sealer began to peel as soon as it finally dried.
I used an orbital floor sander on the main body of the deck to remove the old deck sealer, however I have had no choice but to use a small palm sander on the deck edges. Though it is working it is a slow process.
I am using the same 36 grit sandpaper that I did on the main body of the deck. As a matter of fact, I am using the same pieces of sandpaper. I have simply cut small wedges out of them to fit the palm sander. The palm sander has a surface area of about 4”x4”.
With a little luck I will wrap up the deck sanding today and will stain it when there is a 24 hour window of dry weather. Unfortunately, in the northeast lately dry weather is as rare as a blue moon. I’ll keep my fingers crossed.
Sanding a Deck with a Palm Sander You On Here » Sanding a Deck with a Palm Sander
