home improvement design

Search This Blog

Pages

Use Masking Tape to get Clean Caulk Lines You On Here » Use Masking Tape to get Clean Caulk Lines

By Mark J. Donovan

When caulking around a bathtub, or over any type of seam, the best way to get clean lines is to use a little masking tape.

Note: If there is old caulk that is dried out and peeling away from a seam remove it before applying new caulk.

Once the seam is ready to be caulked, apply masking tape to either side of the seam such that you create a gap for applying the caulk.

Now apply your caulk with a caulking gun.

Next use a moist towel, or finger, and run it down the length of the freshly caulked seam.

Allow the caulk to set up a few minutes, and then peel away the masking tape.

With the tape removed, you will have clean lines that are uniform in width the length of the caulk seam.

you on Use Masking Tape to get Clean Caulk Lines https://myhomeimprovementdesign.blogspot.com/2008/06/use-masking-tape-to-get-clean-caulk_22.html
related postUse Masking Tape to get Clean Caulk Lines for you .
My ZimbioMy Ping in TotalPing.com

Followers